Showing posts with label guitar gloves. Show all posts
Showing posts with label guitar gloves. Show all posts

Thursday, May 22, 2014

is there gloves for playing guitar?




rockman


well i have short fat fingers that cant reach accross the fret board,also i have several pieces of broken glass in my fretting hand ,after a few minutes my hand aches terribly.i figured till i get the pieces removed surgically,using a glove could help.


Answer
http://www.fingergloves.com/
i found this, maybe it could work out.



Powered By Y! Answer Blogger Poster

Monday, November 4, 2013

What guitar can I get that is cheap and good?

guitar gloves
 on body glove bgs1eb soft bass guitar case body glove s
guitar gloves image



Mishogyny


What acoustic guitar should I get? I would like built in tuners, between $200-$600, and should be a decent guitar (decent sound quality and reliable). Are there any guitars with other special features I should be aware of? Please help me


Answer
I can find no fault with the brands of instruments that have been mentioned thus far. But brand isn’t as important as finding the guitar that’s right for you. No one else can really tell you what to buy. It’s sort of like buying a baseball glove. Brand can give you some assurance but in the end what really matters is how it fits, feels and works for you. There are plenty of no name brands out there that are perfectly fine. You have to go to a music store and hold them, Try them out. If you can’t play, have someone play them for you. But pluck them and fret them as though you can play. Find the neck, body size and sound that pleases you.

•You need to make sure you get one with a good neck. When you sight up the neck, the strings will get progressively further away from the frets, as they progress further up the neck. Less change is better.

•You’ll want to make sure the neck is not bowed. If the strings start close to the frets then further then close again, DON’T buy it. It may be something that can be fixed but make it someone else’s problem.

•Get one with a truss rod. A truss rod is a bar that goes through the neck and allows for adjustment of the neck.

•Make sure the width of the neck is suitable. Players with larger hands usually prefer wider necks.

•Sit down and hold the guitar as though you’re playing. How is the weight and balance? Does it suit you?

•If you pluck the strings and they buzz, the strings are probably too close to the neck for you.

•If you find it really difficult to press the strings down, the strings are probably to far away from the neck for you.

•Before you finish, try turning one or two of the tuning keys to see how they feel. You can gauge the quality of them by how they feel. You’re looking for smooth and precise.

Take your time with this purchase. Compare the prices on the makes and models in the stores to the prices at Musicians Friend or American Musical Supply. These are reliable online instrument vendors. If the price online and the price at the local music store are comparable, buy from the local store. They are the ones who have spent time with you and let you handle their stock. Besides, you’ll probably need accessories and guidance from them in the future.

Once you find your match, be prepared to have sore fingertips for awhile. It will take at least a month (depending on how much you practice) to build up calluses



Powered By Y! Answer Blogger Poster

Sunday, October 13, 2013

How to thourghly clean an electric guitar bridge?

guitar gloves
 on ... Glove Series One Bass Guitar Gig Bag. AmericanMusical.com makes it
guitar gloves image



emma n


I just acquired an electric Lyon guitar and the bridge is absoutey filthy. When you are looking down the neck at the bridge there is a. Heaping load of dust and dirt. How do I clean that?


Answer
soft bristle tooth brush and compressed air in most cases, but with a low end Lyon who knows what little kids bed its been under, might want to use a hasmat suit or at least rubber gloves and dust mask before touching it. god only know what kind of critters or nastyness could be living on it. sure as heck wasn't in any ones prized collection



Powered By Y! Answer Blogger Poster

Monday, August 26, 2013

Is it possible to get an allergic reaction from nickel guitar strings?

guitar gloves
 on body glove bgs1eb soft bass guitar case body glove s
guitar gloves image



Morten S


I just baught some DR guitar strings for my electric guitar, and i was wondering if i possibly could get an allergic reaction from them, since they are nickel coated. I have a gig in about a month, and will this effect my playing if i get an allergic reaction? I do not want to mess up my fingers so i can't practice/play at the gig.

Can someone please help, thanks...



Answer
Yes nickel can cause contact dermatitis a form of skin allergy .to avoid this you have to wear gloves



Powered By Y! Answer Blogger Poster

Thursday, August 22, 2013

How to thourghly clean an electric guitar bridge?

guitar gloves
 on WI - Reports: multiple injuries following Sikh temple shooting near ...
guitar gloves image



emma n


I just acquired an electric Lyon guitar and the bridge is absoutey filthy. When you are looking down the neck at the bridge there is a. Heaping load of dust and dirt. How do I clean that?


Answer
soft bristle tooth brush and compressed air in most cases, but with a low end Lyon who knows what little kids bed its been under, might want to use a hasmat suit or at least rubber gloves and dust mask before touching it. god only know what kind of critters or nastyness could be living on it. sure as heck wasn't in any ones prized collection



Powered By Y! Answer Blogger Poster

Tuesday, August 6, 2013

How to thourghly clean an electric guitar bridge?

guitar gloves
 on Reds second baseman Brandon Phillips won his first Gold Glove for his ...
guitar gloves image



emma n


I just acquired an electric Lyon guitar and the bridge is absoutey filthy. When you are looking down the neck at the bridge there is a. Heaping load of dust and dirt. How do I clean that?


Answer
soft bristle tooth brush and compressed air in most cases, but with a low end Lyon who knows what little kids bed its been under, might want to use a hasmat suit or at least rubber gloves and dust mask before touching it. god only know what kind of critters or nastyness could be living on it. sure as heck wasn't in any ones prized collection



Powered By Y! Answer Blogger Poster

Tuesday, July 30, 2013

Is it possible to get an allergic reaction from nickel guitar strings?

guitar gloves
 on ... brown ball glove leather guitar strap embossed with Martin Guitar logo
guitar gloves image



Morten S


I just baught some DR guitar strings for my electric guitar, and i was wondering if i possibly could get an allergic reaction from them, since they are nickel coated. I have a gig in about a month, and will this effect my playing if i get an allergic reaction? I do not want to mess up my fingers so i can't practice/play at the gig.

Can someone please help, thanks...



Answer
Yes nickel can cause contact dermatitis a form of skin allergy .to avoid this you have to wear gloves



Powered By Y! Answer Blogger Poster

Wednesday, July 3, 2013

What guitar can I get that is cheap and good?

guitar gloves
 on Purchase Medium Weight Glove from Original Guitar Fingers
guitar gloves image



Mishogyny


What acoustic guitar should I get? I would like built in tuners, between $200-$600, and should be a decent guitar (decent sound quality and reliable). Are there any guitars with other special features I should be aware of? Please help me


Answer
I can find no fault with the brands of instruments that have been mentioned thus far. But brand isn’t as important as finding the guitar that’s right for you. No one else can really tell you what to buy. It’s sort of like buying a baseball glove. Brand can give you some assurance but in the end what really matters is how it fits, feels and works for you. There are plenty of no name brands out there that are perfectly fine. You have to go to a music store and hold them, Try them out. If you can’t play, have someone play them for you. But pluck them and fret them as though you can play. Find the neck, body size and sound that pleases you.

•You need to make sure you get one with a good neck. When you sight up the neck, the strings will get progressively further away from the frets, as they progress further up the neck. Less change is better.

•You’ll want to make sure the neck is not bowed. If the strings start close to the frets then further then close again, DON’T buy it. It may be something that can be fixed but make it someone else’s problem.

•Get one with a truss rod. A truss rod is a bar that goes through the neck and allows for adjustment of the neck.

•Make sure the width of the neck is suitable. Players with larger hands usually prefer wider necks.

•Sit down and hold the guitar as though you’re playing. How is the weight and balance? Does it suit you?

•If you pluck the strings and they buzz, the strings are probably too close to the neck for you.

•If you find it really difficult to press the strings down, the strings are probably to far away from the neck for you.

•Before you finish, try turning one or two of the tuning keys to see how they feel. You can gauge the quality of them by how they feel. You’re looking for smooth and precise.

Take your time with this purchase. Compare the prices on the makes and models in the stores to the prices at Musicians Friend or American Musical Supply. These are reliable online instrument vendors. If the price online and the price at the local music store are comparable, buy from the local store. They are the ones who have spent time with you and let you handle their stock. Besides, you’ll probably need accessories and guidance from them in the future.

Once you find your match, be prepared to have sore fingertips for awhile. It will take at least a month (depending on how much you practice) to build up calluses



Powered By Y! Answer Blogger Poster

Thursday, June 6, 2013

Is there any sort of paint thinner that can be used to remove paint off of an electric Guitar?

guitar gloves
 on Check out the newest news, views, lessons and more for Fender lovers ...
guitar gloves image



Sean C


I have an old electric guitar that I am in the process of repainting. I have removed most of the paint by sanding but cannot sand out the details. Is there any sort of paint thinner that I can use to remove the remaining paint WITHOUT damaging the wood?


Answer
Any paint stripper for furniture should work, since they're designed not to damage wood. Just be very careful not to get it into any of the electrical parts. Wear gloves, and if you can, do it outside, the fumes can be pretty awful.



Powered By Y! Answer Blogger Poster

Monday, May 27, 2013

How can I apply paint designs to my guitar?

guitar gloves
 on in store gretsch electric guitars gretsch electric guitars bigsby ...
guitar gloves image



Nathan


I was thinking on painting some pin-stripes, or something like that, on my guitar. I was wondering if I would just be able to cover up spots with tape and spray it and let it dry, or is there more to it?

Also, I've heard that Duplicolor® is a good paint to use; is this true?



Answer
Hello there,

Just tape and spray? Nope. There is more to it than that. A lot more.

Duplicolor? Not on a guitar.

Since you are adding detail and not removing the old finish, you need to match the new paint with the present finish. Go check the manufactures specs to see what type of finish was used. If the finish is lacquer, then use lacquer. If the finish is urethane, use urethane. If you have a very cheap guitar, the finish might be poly.

Clean the areas to be painted. Lighter fluid usually works. Test it on a small spot on the back to make sure it does not damage the finish. Clean the body. Then do not handle the body after you have cleaned it. Wear gloves. An air brush is best for small detail work. Use whatever you have. Shoot on your color coats.

Now you are faced with the clear coat issue. If the detail area is small and only in one place, you might get by without clear coating the entire body. If you have detail work on many locations of the body, you are probably going to have to clear coat the entire body.

If you have to clear coat the entire body (everything will have to be removed -- everything). Shoot on the clear coats. Wet sand between coats with 400 grit paper. Shoot on many coats of clear. Than after the last clear coat let it cure. Then wet sand with progressively finer grit. From 600 up to 2000.

If you only put a small detail on, you may clear coat over it without redoing the entire body. Then sanding is on an as needed basis.

Later,



Powered By Y! Answer Blogger Poster

Tuesday, May 7, 2013

Is it possible to get an allergic reaction from nickel guitar strings?

guitar gloves
 on Promotional Products by D3 Design Group
guitar gloves image



Morten S


I just baught some DR guitar strings for my electric guitar, and i was wondering if i possibly could get an allergic reaction from them, since they are nickel coated. I have a gig in about a month, and will this effect my playing if i get an allergic reaction? I do not want to mess up my fingers so i can't practice/play at the gig.

Can someone please help, thanks...



Answer
Yes nickel can cause contact dermatitis a form of skin allergy .to avoid this you have to wear gloves



Powered By Y! Answer Blogger Poster

Sunday, May 5, 2013

How can I apply paint designs to my guitar?

guitar gloves
 on Promotional Products by D3 Design Group
guitar gloves image



Nathan


I was thinking on painting some pin-stripes, or something like that, on my guitar. I was wondering if I would just be able to cover up spots with tape and spray it and let it dry, or is there more to it?

Also, I've heard that Duplicolor® is a good paint to use; is this true?



Answer
Hello there,

Just tape and spray? Nope. There is more to it than that. A lot more.

Duplicolor? Not on a guitar.

Since you are adding detail and not removing the old finish, you need to match the new paint with the present finish. Go check the manufactures specs to see what type of finish was used. If the finish is lacquer, then use lacquer. If the finish is urethane, use urethane. If you have a very cheap guitar, the finish might be poly.

Clean the areas to be painted. Lighter fluid usually works. Test it on a small spot on the back to make sure it does not damage the finish. Clean the body. Then do not handle the body after you have cleaned it. Wear gloves. An air brush is best for small detail work. Use whatever you have. Shoot on your color coats.

Now you are faced with the clear coat issue. If the detail area is small and only in one place, you might get by without clear coating the entire body. If you have detail work on many locations of the body, you are probably going to have to clear coat the entire body.

If you have to clear coat the entire body (everything will have to be removed -- everything). Shoot on the clear coats. Wet sand between coats with 400 grit paper. Shoot on many coats of clear. Than after the last clear coat let it cure. Then wet sand with progressively finer grit. From 600 up to 2000.

If you only put a small detail on, you may clear coat over it without redoing the entire body. Then sanding is on an as needed basis.

Later,



Powered By Y! Answer Blogger Poster